Adjusting windscreen
Slacken clamping screws 1
on left and right.
Pivot the windscreen for-
ward or back to the desired
position.
You can set the wind-
screen to any of six dif-
ferent positions.
Make sure that clamping
screws 1 on left and
right are symmetrically
positioned.
Tighten the clamping
screws.
Clutch
Adjusting the clutch
lever
If the position of the
clutch fluid reservoir is
changed, air can enter the
clutch system.
Do not twist the handlebar
fitting or the handlebars.
Attempting to adjust the
clutch lever while riding
the motorcycle can lead to
accidents.
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1
clockwise.
Span between handlebar
grip and clutch lever in-
creases.
Turn adjusting screw 1
counter-clockwise.
Span between handlebar
grip and clutch lever de-
creases.
4
43
z