Table of Contents
Advertisement
Selecting the Channel
The channel is the frequency of the radio uses to transmit.
1. Press
Menu until the channel number starts to flash.
2. Press
or
to change the channel. Long press on
these keys allows you to scroll through the channels
rapidly to browse the codes.
3. Press the PTT button to exit menu or
set up.
Selecting the Sub-Code
Sub-Codes help minimize interference by blocking
transmissions from unknown sources. Your radio has 121
Sub-Codes.
To set the code for a channel:
1. Press
Menu until the code starts to flash.
2. Press
or
to select the code. You can hold down the
button to speed up scrolling through the codes.
3. Press the PTT button to exit menu or
set up.
Setting and Transmitting Call Tones
Your radio can transmit different call tones to other radios in
your group. Your radio has 20 call tones for you to choose
from.
To set a call tone:
1. Press
Menu until the Call Tone
current call tone setting flashes.
2. Press
or
to change and listen to the call tone.
3. Press the PTT button to exit menu or
set up.
In order to transmit your call tone to other radios, set up the
same channel and Sub-Code on your radio and press
Tone.
Easy Pairing
The Easy Pairing feature allows a group of radio users to
program all their radios to the same Channel and Sub-Code
settings quickly and simultaneously. Any one radio within the
Menu to continue
group can be designated as the "Leader's radio" and have
it's Channel and Sub-Code settings transmitted to and
copied by all the other radios in the group (Members' radios).
1. Pick any one of the radios as the "Leader's radio". On this
2. To copy the channel and Sub-Code combination to all the
Menu to continue
3. On the Leader's radio, press and hold down the
icon appears. The
Menu to continue
radio, program the Channel and Sub-Code to the desired
settings.See "Selecting the Channel" and "Selecting the
Sub-Code" sections in this user manual.
other "Members' radios", press and hold the
the Members' radios until you hear a beep. Release the
button after the beep, and wait for the transmission from
the Leader's radio.
Note:
• You will see the
icon blinking on the display. This confirms that
the radio is in Easy Pairing mode waiting to receive the Channel
and Sub-Code settings from the Leader's radio. All Members'
radios remain in this mode for 3 minutes.
• A group with many radios should have all users take this step at the
same time, so all radios can be programmed in one go.
until you hear a double beep.
Note:
• At the double beep, this radio's Channel and Sub-Code settings
will be transmitted, which will be received and copied by all the
other (Members') radios.
• The Leader's radio must make this transmission when all the
Members' radios are still in the Easy Pairing mode, otherwise the
transmission will not be picked up.
Call
button on
button
5
Advertisement
Table of Contents
