Warranty Information - Motorola Talkabout T82C Owner's Manual

2. When the radio detects channel activities matching the
channel and Sub-Code combination, the radio stops
scrolling and you can hear the transmission.
3. Press the PTT button within 5 seconds after the end of
the transmission to respond and talk to the person
transmitting.
4. The radio resumes scrolling through the channels 5
seconds after the end of any received activity.
5. Press the Scan/Monitor button briefly to stop scanning.
To start Advanced Scanning:
1. Set home channel's Sub-Code to "zero" or OFF.
2. Press the Scan/Monitor button briefly. The Scan
icon appears in the display and the radio begins to scroll
through the channels. No Sub-Codes filters what is
heard.
3. When the radio detects channel activities with any code
(or NO code), it stops scrolling and you can hear the
transmission. Any Sub-Code that may be use by other
party will be detected and displayed.
4. Press the PTT button within 5 seconds after the end of
the transmission to talk.
5. The radio resumes scrolling through the channels 5
seconds after the end of any received activity.
6. Press the Scan/Monitor button briefly to stop scanning.
Note:
1. The transmission will be on the "Home Channel" if you press the PTT
button while the radio is scrolling through inactive channels. You may
press the Scan/Monitor button to stop scanning at any time.
2. You may immediately resume the scan by briefly pressing
the radio stops on an undesired transmission.
3. You may temporarily remove that channel from the scan list by
pressing and holding or
repeatedly on an undesired transmission. You may remove more
than one channel this way.
8
or
for 3 seconds if the radio stops
4. Turn the radio OFF and then ON, or EXIT and re-enter the scanning
mode by pressing Scan/Monitor to restore the removed
channel(s) to the scan list.
5. You cannot remove the "Home Channel" from the scan list.
6. In the Advanced Scan, the detected code is used for one
transmission. You must take note of that code, exit scan, and set the
detected code on that channel to permanently use.

Warranty Information

The authorized Motorola Solutions dealer or retailer where
you purchased your Motorola Solutions two-way radio and/or
original accessories will honour a warranty claim and/or
provide warranty service.
Please return your radio to your dealer or retailer to claim
your warranty service. Do not return your radio to Motorola
Solutions.
In order to be eligible to receive warranty service, you must
present your receipt of purchase or a comparable substitute
proof of purchase bearing the date of purchase. The two-
way radio should also clearly display the serial number. The
warranty will not apply if the type or serial numbers on the
product have been altered, deleted, removed, or made
illegible.
if