Sony KV-27HS420 Instructions: TV stand (primary manual) Operating Instructions Manual page 52

z
If 4:3 Default is set to
anything but Off, the Screen
Mode setting changes only for
the current channel. When you
change channels (or inputs),
Screen Mode is automatically
replaced with the 4:3 Default
setting. To retain the current
Screen Mode setting as channels
and inputs are changed, set 4:3
Default to Off.
Option Description
4:3 Default Wide Zoom
Select the default
Screen Mode to
use for 4:3 sources
Normal
Full
Zoom
Off
Vertical Center Allows you to move the position of the picture up and
down in the window. (Available only in Wide Zoom and
Zoom modes.)
Press V
between +15 and -15 (Zoom mode), and +5 and -5 (Wide
Zoom mode).
Vertical Size Allows you to adjust the vertical size of the picture.
(Available only in Wide Zoom and Zoom modes.)
Press V
between +7 and -7.
Select to enlarge the 4:3 size picture, while
the upper and lower parts of the picture are
condensed to fit the wide screen.
Select to return the 4:3 picture to normal
mode.
Select to enlarge the 4:3 picture
horizontally only, to fill the wide screen.
Select to enlarge the 4:3 picture
horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Select to continue using the current Screen
Mode setting when the channel or input is
changed.
or v and press to choose a correction
or v and press to choose a correction
51