Overview; Inserting Batteries - Sony KV-27HS420 Instructions: TV stand (primary manual) Operating Instructions Manual

Using the Remote Control

Overview

Inserting Batteries

This chapter describes how to set up, program, and use the TV's
remote control.
Topic
Inserting Batteries
Button Descriptions
Programming the Remote Control
1
Remove the battery cover from the remote control.
2
Insert two size AA (R6) batteries (supplied) by matching the e
and E terminals on the batteries to the diagram inside the battery
compartment.
3
Replace the battery cover.
1
✍
Remove the batteries to avoid damage from possible battery leakage
whenever you anticipate that the remote control will not be used for an
extended period. Handle the remote control with care. Avoid dropping it,
getting it wet, placing it in direct sunlight, near a heater, or where the
humidity is high.
Page
33
34
37
2
33