Tv Controls And Connectors; Front Panel - Sony KV-27HS420 Instructions: TV stand (primary manual) Operating Instructions Manual

TV Controls and Connectors

Front Panel

1 2
VIDEO 2 INPUT
S VIDEO VIDEO L(MONO) – AUDIO – R
Item
1 S VIDEO
VIDEO 2 INPUT
VIDEO/L(MONO)-AUDIO-R
2
VIDEO 2 INPUT
MENU
3
4 V v B b
5
TV/VIDEO
6
7 -VOLUME +
8 -CHANNEL+
9 STAND BY/
TIMER LED
Infrared Receiver (IR)
0
POWER
qa
10
3 4 5 6 7
VOLUME
TV/VIDEO
MENU
Description
Connects to the S VIDEO OUT jack on your camcorder or other video
equipment that has S VIDEO. Provides better picture quality than composite
video (2).
Connects to the composite A/V output jacks on your camcorder or other
video equipment.
Press to display the Menu. Press again to exit from the Menu. For details, see
"Using the Menus" on page 45.
Press V v B b to move the on-screen cursor.
Press to select the on-screen highlighted item.
Press repeatedly to cycle through the video equipment connected to the TV's
video inputs.
Press to adjust the volume.
Press to scan through channels. To scan quickly through channels, press and
hold down either CHANNEL
Blinks when the TV is turned on, then shuts off when the picture is displayed.
If the LED blinks continuously, this may indicate the TV needs service (see
"Contacting Sony" on page 63).
When lit, indicates one of the timers is set. When the timer is set, this LED
will remain lit even if the TV is turned off.
Receives IR signals from the TV's remote
Press to turn on and off the
8
+
CHANNEL
_
button.
control.
TV.
9 q; qa
POWER
STAND BY
TIMER