Sony KV-27HS420 Instructions: TV stand (primary manual) Operating Instructions Manual page 26

Notes on Using This Connection
To Do This ...
Watch the DVD player
Set up the TV remote control
to operate the DVD player
Activate the TV remote
control to operate the DVD
player
Control DVD functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
Do This ...
Press TV/VIDEO repeatedly to select the DVD input (VIDEO 5 in the
illustration).
If you have a non-Sony DVD player, you must program the remote control.
See "Programming the Remote Control" on pages 37-38.
Press VCR/DVD FUNCTION.
See "Operating a DVD Player" on page 44.
See the instructions for setting up Video Labels on pages 58-59.
✍
You cannot record the signal from any equipment connected into the Y, P
P jacks.
R
,
B
25