Sony WEGA KLV-S19A10 Operating Instructions Manual page 25

Notes on Using This Connection
To Do This ...
Watch the DVD player
Set up the remote control to
operate the DVD player
Activate the remote control to
operate the DVD player
Control DVD functions with the
remote control
Label video inputs to easily
identify equipment connected to
the TV
Do This ...
Press WEGA GATE to select the DVD player input (Video 4) in the External Inputs
list.
Press TV/VIDEO repeatedly to select the DVD player input (Video 4).
You must program the remote control. See "Programming the Remote Control" on
page 34.
Press DVD/VCR (FUNCTION).
See "Operating a DVD Player or DVD Changer" on page 36.
See the instructions for setting up Label Video Inputs on page 61.
To connect a DVD player with S VIDEO and audio connectors
If your DVD player does not have component video (YP
component video inputs are already connected to another device, use this
connection.
1
Use an S VIDEO cable to connect the DVD player's S VIDEO output
jack to the TV's S VIDEO input jack (VIDEO 1 or 3).
2
Use an audio cable to connect the DVD player's AUDIO output jacks to
the TV's AUDIO input jacks (VIDEO 1 or 3).
If your DVD player is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
Connecting the TV
or
P ) jacks, or the
B R
25