Loading Procedure - GE TONOPORT V Service Manual

6.2

Loading Procedure

6-2
Firmware Loading Procedure: Loading Procedure
Connect inactive TONOPORT V to USB port or RS232 port via the USB or

RS232 cable.
Turn on TONOPORT V.

NOTE
After TONOPORT V has been switched on, updating can only be carried
out within the first 10 minutes. After 10 minutes TONOPORT V enters a
power down mode and can be reactivated by switching on and off.
Click the "Start Update" button and follow the displayed prompts.

Switch off TONOPORT V.

Disconnect TONOPORT V from PC.

TONOPORT V
2001589-094
Revision D