Storing, Transporting And Disposing Of Airbag, Belt Tensioner And Battery Disconnector Units (Py- Rotechnic Components) - Audi Q5 80A 2017 Installation Instructions Manual

Fixed/mechanically removable towing bracket with e-set nar, for package number 80a.092.115, genuine accessories
Table of Contents

Advertisement

Installation instructions - Audi Q5 (80A) 2017 ► Fixed/mechanically removable towing
◆ Pyrotechnic components must be installed immediately after
they are removed from the transport container.
◆ If work is interrupted, the pyrotechnic component must be re-
turned to the transport container.
◆ Pyrotechnic components must not be left unattended.
◆ When connecting the pyrotechnic components in the re-
straint system, only the person performing the work may be
inside the vehicle.
◆ Pyrotechnic components must not be treated with grease,
cleaning agents or similar products.
◆ If the fabric becomes contaminated with substances such as
oil, grease, paint, colour or solvents, the airbag unit must be
replaced.
◆ In addition, pyrotechnic components must not be exposed to
temperatures above 100°C, even for short periods.
2.2
Storing, transporting and disposing of
airbag, belt tensioner and battery dis-
connector units (pyrotechnic compo-
nents)
◆ Storage is subject to the applicable national legislation.
◆ Transportation is subject to national and international laws
governing packaging, naming, labelling and accompanying
documentation.
◆ Pyrotechnic components that have not been ignited must be
returned in the original packaging for appropriate recycling in
line with the applicable national legislation. Contact your im-
porter if you have any questions.
◆ Only pyrotechnic components that have been completely ig-
nited may be disposed of as industrial waste.
WARNING
This does not apply for belt tensioners that operate ac-
cording to the Wankel tensioner principle. Tensioners of
this kind should be handled in the same way as pyrotech-
nic components that have not been ignited (e.g. airbags).
Background: For belt tensioners that operate according
to the Wankel tensioner principle, it is not possible to
check whether all ignition stages have completed using
workshop tools.
2 Safety instructions for pyrotechnical, electrical and mechanical components of the restraint system
bracket with E-set (NAR),
Edition 01
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents