Sony Bravia KDL-46X4500 Operating Instructions Manual page 42

Video Labels
Auto S Video
HDMI Set-up
Auto Start-up
Power Saving
42
GB
Assigns an icon or name to equipment connected to the side and rear jacks. The
icon and name appear briefly on the screen when you select the equipment.
1
Press F/f to select the desired input source, then press
Skip Inputs
For each input, sets whether or not to display on the Home
Menu or in a list of inputs that will appear when you press
Auto
Always Display Always displays the icon and name
Skip
2
Press g to assign an icon and name.
Label Inputs
Uses preset labels to assign a name to connected equipment.
Allows you to create your own label when you select "Edit".
Edit
Edit the name in the edit screen and choose the appropriate
icon.
Sets the input signal from S video jack
connected to the Video 1 and
Allows the TV to communicate with equipment that is compatible with the control
for HDMI function, and connected to the HDMI jacks of the TV. Note that
communication settings must also be made on the connected equipment.
Control for HDMI Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for
HDMI. When set to "On", the following functions are
available.
If the specific Sony equipment that is compatible with control
for HDMI is connected, this setting is applied to the
connected equipment automatically when the "Control for
HDMI" is set to "On" using the TV.
Auto Devices Off When this is set to "On", the connected equipment that is
compatible with control for HDMI turns off when you turn
off the TV.
Auto TV On
When this is set to "On", the TV turns on when you turn on
the connected equipment that is compatible with control for
HDMI.
HDMI Device List Displays a list of connected equipment that is compatible
with control for HDMI.
~
• You cannot use "Control for HDMI" if the TV operations are linked to the
operations of an audio system that is compatible with control for HDMI.
You can run the initial set-up that appeared when you first connected the TV, and
select the language, or tune in all available channels again.
Even if you have made the settings when you first connected the TV, you may need
to change the settings after moving house, or to search for newly launched
channels.
Reduces power consumption of the TV by adjusting the backlight.
When you select "Picture Off", the picture is switched off, and the
indicator on the TV front panel lights up in green. The sound remains unchanged.
.
Displays the icon and name only when
the equipment is connected.
regardless of whether or not the
equipment is connected.
Does not display the icon and name even
if the equipment is connected.
Video 1 when you have equipment
Video 1 jacks.
.
(Picture Off)