Page 1
BFS440, BFS450 Description Cordless Screwdriver ONCEPT AND MAIN APPLICATIONS Models BFS440 and BFS450 have been developed as a single-shot type Cordless Screwdriver, featuring more convenience with one-touch locator and LED job light. (The image above is BFS450.) These products are available in the following variations.
Description Use for 1R269 Bearing extractor Removing Ball bearing 608 [2] LUBRICATION Apply Makita grease FA.No.2 to the following portions designated with the black triangle to protect parts and product from unusual abrasion. Item No. Description Portion to lubricate Amount...
Page 3
P 3/ 7 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Locater Section DISASSEMBLING Pull Lock ring strongly. Locater complete and Lock ring can be removed together. When removing Locater base complete together with Locater complete and Lock ring, etc.: 1 Loosen 4x18 Tapping screws (2 pcs.) and remove Front cover. 2 Loosen M4x25 Pan head screw and pull Locater base complete.
Page 4
Fig. 10 5) Assemble the parts illustrated below into Clutch section. Note: Plane bearing 14 Apply Makita grease FA.No.2 to the specific portions of Spindle and Shoulder pin 8-10 illustrated in Fig. 1. Steel ball 3.5 Spindle Shoulder pin 8-10...
P 5/ 7 epair [3] DISASSEMBLY/ASSEMBLY [3] -5. Motor Section DISASSEMBLING 1) Remove Housing R (Fig. 4) 2) Disassemble Armature from the machine as illustrated in Figs. 12 and 13. Fig. 12 Fig. 13 Brush holder Carbon complete brush Torsion spring Armature Carbon...
Page 6
P 6/ 7 epair [3] DISASSEMBLY/ASSEMBLY [3] -5. Motor Section (cont.) ASSEMBLING 3) Assemble the Motor section to Housing L as illustrated in Fig. 16. Fig. 16 Assembling Brush Holder to Housing L Housing L 1) Fit Brush holder complete in the groove groove of Housing L.
P 7/ 7 ircuit diagram Fig. D-1 Color index of lead wires' sheath Black White Switch Blue Brush Holder Complete Yoke unit Circuit Terminal iring diagram Fig. D-2 Switch lead wires (red, black) must be passed between rib A and rib B. Switch rib B rib A...