Marshall Amplification ACTON II VOICE User Manual page 20

PROBLEM
THERE IS A
CRACKLING
SOUND
THE AUDIO IS
DISTORTED
ERRATIC
PERFORMANCE
NOTES:
A Wi-Fi DEVICE COULD CAUSE AUDIO-RELATED OR TECHNICAL FAULTS, DEPENDING ON USE, IN THE FOLLOWING
CASES:
• WHEN SOME PART OF THE BODY IS IN CONTACT WITH THE RECEIVING/TRANSMITTING SYSTEM FOR THE Wi-Fi
DEVICE OR THE ACTON II.
• ELECTRICAL VARIATIONS DUE TO OBSTACLES IN THE FORM OF WALLS, CORNERS, ETC.
• EXPOSURE TO ELECTRICAL DISRUPTIONS FROM DEVICES WITHIN THE SAME FREQUENCY BAND, FOR EXAMPLE
MEDICAL EQUIPMENT, MICROWAVE OVENS OR OTHER WIRELESS NETWORKS.
THIS WIRELESS DEVICE MAY CAUSE ELECTRICAL DISRUPTIONS DURING USE.
020.
TROUBLESHOOTING
CAUSE
The amplifier is clipping as it
has run out of output power.
Volume is set too high on the
audio source.
The audio stream or audio file
is of poor quality.
Volume is set too high on the
Acton II.
Too much bass/treble on the
speaker.
Interference from another
electronic device.
ACTION
Decrease the volume on your
audio source.
Lower the volume or bass on
the Acton II.
Turn down the playback
volume on the audio source.
Try another audio file or music
player.
Lower the volume on the
speaker.
Lower the bass/treble on the
speaker.
Move the Acton II to another
spot.
Turn off or move the interfering
electronic device.