Switching On The Tv; Automatically Tuning The Tv - Sony Trinitron KD-32DX100U Quick Start Manual

4

Switching on the TV

1 Connect the TV plug to your mains socket (220 - 240V AC, 50 Hz) and switch on.
2 Push in the On/Off button ( ) on the front of the TV.
If the red standby mode indicator on the front of the TV is lit, press the TV
on the remote control to switch on the TV set. Please be patient as the picture may
take a few moments to appear on the TV screen.
6 Selecting Digital
or analogue mode
Press the DIGITAL/ button on the
remote control to switch between
Digital and analogue mode.
To check if you are watching a Digital or
analogue mode press the PROG +/-
button. If you are watching a digital
programme a banner will appear
momentarily at the top of the screen. In
analogue mode, this banner is not
present.
5
DIGITAL/ button
Numbered buttons
Control Pad
(v,V, OK buttons)
On/Off button
PROG +/- buttons
/
button
Your television stations are now stored in your television's memory.
Banner indicating TV is in Digital mode
DIGITAL/

Automatically tuning the TV

When you first switch on your new TV you need to tune in all the available channels. The 'Auto Tune' feature automatically searches and stores all
the available channels for you. The following instructions and illustrations will guide you through this procedure.
VIDEO / /
TV
1. When you switch on the TV for the first time the Language/Country menu appears on the
DIGITAL
TV screen with the word 'English' highlighted. Press the V or v buttons on the remote
control to choose your required language. Press the OK button to confirm.
1 2 3
4
5 6
2. The word 'Country' is now highlighted. Press the V or v buttons on the remote control to
choose the country in which you are using this TV. Press the OK button to confirm.
7 8
9
0
Note: The Digital features of this TV are designed for use in Great Britain only.
3. The autotune prompt screen appears. Press the OK button to select 'Yes'. The autotune
procedure begins, first tuning in all available Digital channels.
As this may take some time, a display appears on the TV screen to inform you of the tuning
O K
progress.
When all the available Digital channels are found, the analogue tuning display appears and
all the analogue channels are captured and stored.
If no Digital and no analogue channels are found, a display appears on the TV screen
asking you to confirm your aerial is connected. Check the aerial has been connected
correctly then press the OK button to repeat the tuning process.
Once all Digital and analogue channels have been captured and stored, the TV returns to
normal operation and displays the Digital channel stored on channel number 1.
Note: If no Digital channels are captured, the analogue channel that is stored on channel number 1 is displayed.
4. To view programmes, press the PROG+/- buttons or the numbered buttons.
7
Watching a pre-recorded video tape
1. With a pre-recorded video tape inserted into your VCR, press the 'PLAY' button on the VCR. The TV
automatically displays the video picture (providing that you have used a fully wired 21 pin scart lead to connect
your VCR to the TV).
VIDEO / /
TV
If the video picture does not automatically appear, press the
DIGITAL
button
the video picture is displayed on the TV screen.
/ button
2. Press the DIGITAL/
Note: Alternatively, with the TV in analogue mode, press the PROG +/- buttons on the remote control until the picture from the pre-recorded
video tape appears on the TV screen.
If you wish to move your video channel to a different channel number, refer to the 'Programme Sorting' feature in 'The Set Up menu'
section of this instruction manual.
/ button on the remote control repeatedly until
button on the remote control to return to normal TV mode.
Choosing the language.
Choosing the country.
The autotune prompt screen.
Tuning the Digital channels.