IBM 5100 Basic Reference Manual page 30

26
There are no parameters for the PATCH command. When the PATCH command is
entered and executed, the following options are displayed:
ENTER OPTION NO.
1. COPY IMF TAPE
2.
LOAD IMFs
3. DISP EC VER.
4.
KEY-ENTER IMF
5. END OF JOB
6. TAPE RECOVERY
7. TAPE COpy PGM
"S."
flashingJ
The display shows the options available with each option identified by an option
number.
To initiate a selected option:
• Enter the option number.
• Press EXECUTE.
Entering an option number other than those displayed causes the options to be
redisplayed.
Once you have entered an option number, additional prompts, if any, are displayed
for the option selected.
Option 1 - Copy IMF Tape
The copy IMF tape option allows you to copy the following files from the
cartridge:
• File 1, which contains:
- Copy IMFs program
Load IMFs program
- Display EC version program
• File 2, which contains IMFs for the 5100. IMFs are copied from file 2 as
follows:
Copy alllMFs that apply to BASIC or to APL.
- Copy alllMFs that apply to the 5100 on which the copy IMF tape program
is running.
Copy IMFs by problem number.
Copy IMFs by problem number that apply to the 5100 on which the copy
IMF tape program is running.
,/
''"'---