IBM 5100 Basic Reference Manual page 163

(
(
(
(
02. If the display screen does not show the correct results in the remaining
steps of this procedure, press RESTART once, go back to step 1, and try
again. If the correct result is still not shown, call for service.
Enter the data shown by the drawings below. The data will
be
displayed as
the keys are pressed.
If you make a keying error, you can press the backspace k e y . (above
EXECUTE) to backspace the cursor and then press the correct key. If you
pressed EXECUTE and the line was incorrect, press. (next to AnN)
once, and reenter the line. If the error causes the screen to flash, press
ATTN before reentering the line.
Press the following keys in sequence line by line:
o [ ___
0--JJ
Q
0 8
O(_0_JQ08
o [ ___
0_)
GJ
0
Q [J
Q
[ ] [_0---,)
Q
GJ
GJ
GJ
GJ Q 0 Q 0
GJ
GJGJGJ
159