IBM 5100 Basic Reference Manual page 166

162
The display screen will again show:
I~EADY
This completes the BASIC checkout procedure.
o
10. Check to see that you received all the items on the Contents Checklist.
If any of the preceding items are missing, notify your IBM marketing
representative.
If the words above the top row of numeric keys are labeled on the left with:
APL
BASIC
BASIC}
APL
COMM
f
BASIC
APL
, you have an APL machine without the communications feature.
, you have a BASIC machine without the communications feature.
, you have a combined machine.
, you have a combined machine with the communications feature.
COMM} , you have an APL machine with the communications feature.
APL
COMM} , you have a BASIC machine with the communications feature.
BASIC
If you have not checked out APL on a combined machine, set the BASIC/APL
switch to the APL position, press RESTART, and go to the APL checkout
procedure in Appendix A of the IBM 5100 APL Reference Manual, SA21-9213.
If you already did the APL checkout procedures, continue with step 11.
o
11. If the auxiliary tape unit is to be installed, unpack the tape unit and proceed
to the Auxiliary Tape Unit Setup Procedure which follows. After installing
the auxiliary tape unit, return to step 12.
o
12. If the printer is to
be
installed, unpack the printer and proceed to the Printer
Setup Procedure which comes later in this appendix. After installing the
printer, return to step 13.
o
13. If your 5100 is equipped with any other feature, use the manual supplied
with that feature to set up and check out the feature, then return to step 14
in this manual.
o
14. When the preceding devices or features are installed, or if none are, begin
reading the IBM 5100 BASIC Introduction to learn how to operate your 5100.
/
./
.".