Advertisement
Quick Links
Operation & Maintenance Manual
AquaSolve
Anti-Scale Systems
Chemical-Free, Salt-Free
Scale Prevention
M8414TM-COM (50 GPM)
M8416TM-COM (75 GPM)
Important: Read this Manual BEFORE using this equipment. Failure
to read and follow all safety and use information can result in death,
serious personal injury, property damage, or damage to the
equipment. Keep this Manual for future reference.
IOM-ASM1465TM_M1665TM
®
Manufacturing ASME Commercial Water Heaters Since 1961
PVI Industries • 3209 Galvez Avenue • Fort Worth, TX 76111
USA: T: (817) 335-9531 • Toll Free: (800) 784-8326 • PVI.com
Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
© 2019 PVI
Advertisement
Related Manuals for Watts PVI AquaSolve M8414TM-COM
Summary of Contents for Watts PVI AquaSolve M8414TM-COM
- Page 1 Operation & Maintenance Manual AquaSolve ® Anti-Scale Systems Chemical-Free, Salt-Free Scale Prevention M8414TM-COM (50 GPM) M8416TM-COM (75 GPM) Important: Read this Manual BEFORE using this equipment. Failure to read and follow all safety and use information can result in death, serious personal injury, property damage, or damage to the equipment.
- Page 2 Operation & Maintenance Manual AquaSolve ® INTRODUCTION • Compatible with all on-site and community wastewater treatment systems The PVI AquaSolve Anti-Scale System provides pro- • Perfect system for towns or communities where tection from scale formation on internal plumbing water softeners are banned or restricted surfaces.
-
Page 3: Specifications
Operation & Maintenance Manual AquaSolve ® Specifications Standards AquaSolve scale prevention system shall be installed Independent scientific testing has confirmed on the main water service pipe just after it enters the Template Assisted Crystallization (TAC) technology building, but after other whole building water safety provides scale reduction of over 95+%. -
Page 4: Equipment Specifications
Equipment Specifications ****All other contaminants must meet the requirements of the USEPA Safe Drinking Water Act. Specific Mineral and Metal MCLs, identified in Watts’ published Feed Water Chemistry AquaSolve systems are complete, selfcontained, Requirements, supersede the USEPA SDWA. loaded with media, and ready to use. A simple inlet and outlet connection is all that is required for installation. -
Page 5: Installation
Operation & Maintenance Manual AquaSolve ® Installation steady stream of water appears at the drain, close the supply valve and hose bibb. Tighten the tank head Open the inlet and outlet valves on the system. Transfer the bypass valves from Bypass to the NOTICE Service position. -
Page 6: Replacing The Media
Operation & Maintenance Manual AquaSolve ® 11. When all the old media is removed turn off the gar- NOTICE den hose and continue to siphon until the tank is Your AquaSolve media should be replaced every 3 years. about half full with water. 12. -
Page 7: Limited Warranty
Operation & Maintenance Manual AquaSolve ® 2. Any component failure must not result from abuse, fire, freezing or Parts List other acts of nature, violence, or improper installation. Item Qty. PVI Part # Description 3. Equipment must be installed and operated in compliance with the local plumbing codes and on an approved water supply.