Reversing The Door Swing - Dometic DM Series Installation Manual

6.7 Reversing the door swing

I
RM2351, RM2354, RM2451, RM2454, RM2551, RM2554, RM3762, RM3962, DM2652,
DM2662, DM2663, DM2852, DM2862: A hinge kit must be used in order to change the door
swing. For the conversion kit number, visit www.eDometic.com.
DM2672, DM2682, DM2683, DM2872, DM2882
75
Hinge-Pin
Door
Hinge-Pin
Door
Hinge-Pin
➤ Open the door and remove the three screws holding the upper hinge to the frame.
➤ Lift the freezer-door off the middle hinge and set it aside.
➤ Remove the screws holding the middle hinge and lift the fresh-food door off the lower hinge.
➤ Remove the screws holding the lower hinge.
➤ Remove the top and bottom caps on each door.
➤ Unscrew the inserts and blanks and move them to the opposite side of the doors.
➤ Unscrew the handle and slide it off the frame.
➤ Install the door handle on the opposite side of the door by sliding onto the frame and securing it using the
screws.
➤ Install the top and bottom caps to the door.
➤ Swap the upper and lower hinges.
➤ Flip the middle hinge over.
➤ Secure the hinges to the frame, starting at the bottom.
➤ Re-attach each door in the reverse order of their removal.
41
Top Decoration
Handle
Refrigerator
EN