Channel Settings - Sony BRAVIA KDL-37XBR6 Operating Instructions Manual

Signal Type
Auto Program
Add Digital Channels
Show/Hide Channels
Edit Channel Labels
Cable For receiving cable channels via cable TV provider.
Antenna
For receiving signal via over-the-air antenna.
• You should run Auto
Program
after changing the
Signal Type
setting.
Automatically sets the channel list in the TV for all receivable channels. Channel scanning
will be based on the
Signal Type (Cable/Antenna)
setting.
1
Select Auto Program.
2
Select OK to start Auto Program. When Auto Program is completed, the screen
will display the number of channels found.
3 Press RETURN to exit Auto
Program.
• Running Auto
Program
will clear the Favorites channel list for the current signal
type.
• If you run Auto
Program
again, previously scanned channels will be overwritten with
the newly scanned channels.
Select to add digital channels. Be sure to have the
Signal Type
option selected
appropriately for the signal source. (Useful for antenna installations.)
Allows you to show or hide channels when you surf with the CH +/- button or in the TV
channel list on the XMB]_f.
1 Press i_/,!, to scroll through the channels until you highlight the channel to show or
hide.
2 Press @ to select Shown or Hidden.
To show or hide more channels, repeat steps 1-2.
• Hidden channels can be accessed by entering the channel number with 0-9 buttons on
the remote control.
Assigns labels (such as station call letters) to channel numbers.
1 Press i_/,!, to scroll through the channel numbers. Then press @ to select the channel
number to assign a label.
2 Press i_/,!, to scroll through the label characters (A-Z, 0-9, etc.). Press * to move to
the next character. Repeat to add up to 7 characters to the label. Press @ to set it.
To assign labels to more channels, repeat steps 1-2.
• This feature is not available when using the TV Guide On Screen system.
2
"..t
cn
37