Specifications - Sony BRAVIA KDL-37XBR6 Operating Instructions Manual

Specifications
System
Television system NTSC: American TV standaM
ATSC (8VSB lerrestrial): ATSC compliant 8VSB
QAM on cable: ANS1/SCTE 07 2000 (Does nol include CableCARD t'unclionalily)
Channel coverage Analog lerreslrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system LCD (Liquid Crystal Display) Panel
Speaker output lit W + lit W
Input/Output jacks
CABLE/ANTENNA 75-ohm external lerminal for RF inpuls
VIDEO IN l/2/3 S VIDEO (4-pin mini DIN) (VIDEO 1 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative /
C: (t.286 Vp-p (Bursl signal), 75 ohms
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
COMPONENT IN l/2 YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negalive / PB: (1.7Vp-p, 75 ohms /
PR: 0.7 Vp-p, 75 ohms / Signal lormat: 480i, 480p, 720p, 1080i, 1080p
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
HDMI IN l/2/3/4 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p / Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16,
21)and 24bils, Dolby Digilal
AUDIO (HDMI 1N 4 only): 500 mVrms (Typical) / Impedance: 47 kilohms
AUDIO OUT 500 mVrms (typical)
DIGITAL OUT (OPTICAL) PCM/Dolby Digital oplical signal
PC IN D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
See the PC Input Signal ReB_rence Chart on page 14.
PC AUDIO INPUT Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms
Power and others
Power requirement 120 V AC, 60 Hz
Power consumption
in use V and XBR6 series 160 W 200 W 22o W 24o W 26(1W 285 W
W series 23(1W 275 W 295 W
in standby All models less than 0.1 W _
Screen size 31.5 37 4() 42 46 52
(inches measured diagonally) (32 class)
Display resolution 1,920 dots (horizontal) x 1,080 lines (vertical)
Speaker/Full range (2)**(mm) 55 x 120 58 x 126 58 x 126 58 x 126 65 x 150 65 x 150
(inches) 2 ]/s x 4 :_/a 2 I/4 x 5 2 ]/a x 5 2 l/a x 5 2 ]/2 x 5 7/s 2 I12 x 5 7Is
Dimensions withstaud0mn) 794 x 577 x 242 920 x 649 x 279 986 x 684 x 279 1,033 x 718 x 307 1,120 x 782 x 307 1,262 x 871x 347
(inches) 31 3/sx22:_/4x 36 l/4x255/sx 38 7/sx27xll 403/4x283/sx 44 I/sx30v/sx 493/4 x343/sx
95/s 11 12 ]/s 12 I/s 13 3/4
withoutstaud(mm) 794x540x99 920x610x 110 986x646x 110 1,033x677x 110 1,120x742x 115 1,262x829x 119
(inches) 3131sx21_/sx4 36114x241/sx 3871sx25112x 40314x26314x 4411sx29114x 49_/4x32_/ax
4 :_/s 4 3Is 4 :_/s 4 5Is 4 :_/4
wall-lTlount hole pattern
(ITIITI)
200 x 200 300 x 300 3(_) x 300 3(_) x 3(_) 300 x 300 300 x 3(_)
wall-mount screw size (ram) M6 x 12 - 18
Mass with stand (kg) 15.0 21.0 23.0 28.5 30.0 38.0
(lb.) 34.0 47.0 51.0 63.0 67.0 84.0
without stand (kg) 12.(t 18.0 20.0 24.5 26.0 32.1)
(lb.) 27.0 40.0 45.0 54.0 58.0 71.0
Supplied accessories
Remote control RM-YD023 (1) / Size AA batteries (2) / AC power cord (KDL-4()V415(t/KDL-4()V410()/KDL-
46V4100/KDL-52V4100/KDL-40W4100/KDL-46W4100/KDL-52W410()/KDL-46W4150) ( 1) / Cable bolder ( 1
attached to the TV) / Operating Instructions (1) / Quick Setup Guide (1) / Warranty Card (1) / Online Registration
Card (U.S.A. and Canada only) (1) / Sallxy and Regulatory Booklet (1) / Attaching the Table-Top Stand (1) /
Installing the Wall-Mount Bracket (1)
Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket: S(J-WL5(t() / TV Stand: see page 2
While the TV is collecting TV Guide data and/or during software update the power consumption is less than 30 W.
** KDL-W series models come with additional 30 mm (1 1/8") tweeters.
• Optional accessories availability depends on its stock.
• Design and specifications are subject to change without notice.
46