Indicators - Sony BRAVIA KDL-37XBR6 Operating Instructions Manual

Indicators
[] Speaker Outputs the audio signal.
[] Light Senses room light level and adjusts the screen brightness
Sensor
accordingly (see page 42 for details). Do not put anything near
the sensor and the nearby general area (as shown above), as its
function may be affected.
[] PIC OFF/ Lights up in green when the Picture Off feature is activated.
TIMER LED Lights up in orange when the timer is set. When the timer is
set, this LED will remain lit even if the TV is turned off. For
details, see page 31 (Timer) and page 42 (Picture Off).
[]
STANDBY
Lights up in red when your TV is in PC standby mode. If the
LED LED blinks in red continuously, this may indicate that the TV
needs servicing (see contacting Sony information on the back
cover).
[] (IR) Infrared Receives IR signals from the remote control. Do not put
Receiver anything near the sensor, as its function may be affected.
[] POWER Lights up in green when the TV is turned on.
LED
[] SONY Logo The Sony logo will illuminate when the TV is powered on.
Illumination You can turn off the logo illumination, for details see page 42.
• Logo Illumination is available only for KDL-W series.
23