Connecting The Tv; Cable System Or Vhf/Uhf Antenna System; Cable Box/Digital Cable Box - Sony BRAVIA KDL-32L4000 Operating Instructions Manual

Getting Started

Connecting the TV

Cable System or
VHF/UHF Antenna
System
Cable Box/Digital
Cable Box
z To change channels using
the cable box, set your TV
to channel 3 or 4
depending on the cable
box channel output.
Auto Program will fix the
channel automatically.
12
To display clear crisp pictures, you must connect your TV correctly and select
the correct Wide Mode to display the picture in the correct aspect ratio (see
"Changing the Wide Screen Mode" on page 22). It is strongly recommended to
connect the antenna/cable input using the 75-ohm coaxial cable (not supplied)
to receive optimum picture quality signal. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal deterioration. If
you use a 300-ohm twin lead cable, keep it as far away from the TV as
possible.
You can also connect a variety of optional equipment to your TV (see page 15).
For multiple equipment connections, please refer to the Quick Setup Guide.
Cable or VHF/UHF (or VHF only) Antenna
75-ohm coaxial cable
(not supplied)
From settings in
Cable
your type of input signal.
Use this hookup if
s You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
s You do not intend to hook up any other audio or video equipment to
your TV.
Cable
IN
jack
Also, set to
Cable
29).
CABLE/ANTENNA input
settings, select
Channel
75-ohm coaxial cable
(not supplied)
OUT
jack
in the settings in
On Cable
Rear of TV
or
Cable On Cable Off
Rear of TV
CABLE/ANTENNA
input
settings (see page
Channel
for