Preparation For Wall Mounting The Kdl-40S2010 And Kdl-46S2010 - Sony BRAVIA KDL-23S2010 Operating Instructions Manual

Other Information

Preparation for Wall Mounting the KDL-40S2010 and KDL-46S2010

Sony Wall-Mount
Bracket Models
SU-WL51 and
SU-PW2
(KDL-40S2010/
KDL-46S2010)
44
This TV can be installed on a wall by using a wall-mount bracket (sold
separately). Before mounting the TV on a wall, the Table-Top Stand must be
removed from the TV.
Do not remove the Table-Top Stand for any reason other than to wall-
mount the TV.
Follow the simple steps below to remove the Table-Top Stand:
1
Disconnect all the cables from the TV.
2
Start removing the screws from the ones on top. (See illustration below)
Do not remove any other screws from the TV.
3
When screws are removed, lift the TV out. Make sure that you carry out
this task with two people. Do not attempt to lift the TV by your self.
For bracket installation, refer to the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise is required in
installing this TV, especially to determine the strength of the wall for
withstanding the TV's weight. For product protection and safety reasons,
Sony strongly recommends that you use the Wall-Mount Bracket model
designed for your TV and the wall-mounting of your TV should be
performed by Sony dealers or licensed contractors.
Be sure to store the removed screws and Table-Top Stand in a safe
place until you are ready to reattach the Table-Top Stand. Keep the
screws away from small children.