Everpure E-10 Prefilter System EV9795-80 Specification Sheet

Prefilter System for foodservice applications
I N S T A L L A T I O N T I P S
Choose a mounting location suitable to support
the full weight of the system when operating
Make sure to properly lubricate O-ring prior to
use
Use 3/4" water line (Optional reducer bushings
included)
Install vertically with bowl hanging down
Allow 2-1/2" clearance below the cartridge for
easy cartridge replacement
EV9795-80
E- 10 P r ef i l t e r S ys t e m
E-10 Prefilter System: EV9795-80 E-10 Prefilter System: EV9795-80
EC110 Prefilter Cartridge: EV9534-12 EC110 Prefilter Cartridge: EV9534-12
O P E R A T I O N T I P S
Inspect EC110 cartridge periodically to determine
dirt load
Replace EC110 cartridge when dirt has penetrated
through to the inner core of the cartridge
Do not exceed service flow rate
Inspect O-ring during each cartridge change.
Lubricate and/or replace if necessary
B E N E F I T S
Filters out larger dirt and rust particles
Extends the life of primary filter cartridges
Tightly spun EC110 sediment cartridge delivers 10
micron nominal filtration
Durable slim bowl design makes cartridge change
outs easy to handle
Clear housing lets you visually inspect trapped
particles and makes determining when to change
the cartridge easy
10" bowl design accepts most 10" drop in
cartridges
A P P L I C A T I O N / S I Z I N G
For all foodservice applications requiring
prefiltration
High sediment areas