Tire Pressure Monitoring Warning) System (Tpms) - Toyota AVALON 2018 Quick Reference Manual

Tire Pressure Monitoring (warning) System (TPMS)
System reset initialization
1. Push and hold "
2. Wait a few minutes to allow initialization to complete.
The tire pressure detected by the tire pressure warning system can
be displayed on the Multi-Information Display.
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the "POWER" switch to IGNITION ON mode and press and hold the "
button until indicator blinks three times. Let the vehicle sit for a few minutes to allow
initialization to complete.
Refer to the load label on the door jamb or the Owner's Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
Trunk-Internal release
SET" button until the indicator blinks three times.
Pull up
37
SET"