Automatic High Beams (Ahb) - Toyota AVALON 2018 Quick Reference Manual

Automatic High Beams (AHB)

(1)
AHB is a safety system designed to help drivers see more of what's ahead at
nighttime without dazzling other drivers. When enabled, AHB uses an in-vehicle
camera to help detect the headlights of oncoming vehicles and tail lights of
preceding vehicles, then automatically switches between high and low beams
as appropriate to provide the most light possible and enhance forward visibility.
By using high beams more frequently, the system may allow earlier detection of
pedestrians and obstacles.
Refer to a Toyota Owner's Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
(1) With the engine switch in IGNITION ON mode, turn the headlight switch to
"AUTO" position.
(2) Push lever away from you.
The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The AHB indicator will turn off. To turn switch to "
high beam indicator "
When all of these conditions are met, high beams will be automatically turned on
(after approximately 1 second):
turned on.
If any of these conditions occur, the system is designed to automatically turn off
high beams:
turned on.
(2)
" turns on.
33
" position and the manual