Table of Contents
Advertisement
SAFETY & EMERGENCY FEATURES
Tire Pressure Monitoring (warning) System
(TPMS)
The tire pressure warning system can be selected on "
Information Display (MID).
System reset initialization
(1) Press "
" switches and select "
(2) Press "
" switches and select the "Vehicle Settings," then press and hold "
(3) Press "
" switches and select "TPWS" and then press "
(4) Press "
" switches and select "Set Pressure" then press and hold "
the warning light blinks three times.
The tire pressure detected by the tire pressure warning system can be displayed
on the Multi-Information Display (MID).
If the tire pressure indicator flashes for approximately 1 minute and then remains
on, take the vehicle to your local Toyota dealer.
Refer to the load label on the door jamb or the Owner's Manual for tire inflation
specifications.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
" from the Multi-Information Display (MID).
52
" of the Multi-
."
" until
."
Hide quick links:
Advertisement
Table of Contents
