Iso - FujiFilm GFX 50R Owner's Manual

ISO

Adjust the camera's sensitivity to light.
Option Option
AUTO1
AUTO2
AUTO3
12800–100
H (102400/51200/25600),
L (50)
•
N
The Fn1 button can be assigned other roles using D BUTTON/DIAL
SETTING > FUNCTION (Fn) SETTING. The role described above can
also be assigned to other function buttons (P 198).
•
Sensitivity is not reset when the camera is turned off .
•
If desired, you can use D BUTTON/DIAL SETTING > COMMAND
DIAL SETTING to confi gure the camera so that ISO sensitivity can be
adjusted using the front or rear command dial.
Adjusting Sensitivity
High values can be used to reduce blur when lighting is poor, while lower
values allow slower shutter speeds or wider apertures in bright light; note,
however, that mottling may appear in pictures taken at high sensitivities.
Sensitivity is automatically adjusted in response to shooting
conditions according to combination of standard and max-
imum sensitivity and minimum shutter speed chosen for
A SHOOTING SETTING > ISO. Choose from AUTO1,
AUTO2, and AUTO3 (P 120).
Adjust sensitivity manually. Selected value is shown in display.
Choose for special situations. Note that mottling may ap-
pear in pictures taken at H, while L reduces dynamic range.
SHOOTING SETTING
Description Description
6
119