FujiFilm GFX 50R Owner's Manual page 253

Shoe-mounted fl ash units Shoe-mounted fl ash units
EF-X500: This clip-on fl ash unit has a Guide Number of 50/164 (ISO 100, m/ft.)
and supports FP (high-speed sync), allowing it to be used at shutter speeds that
exceed the fl ash sync speed. Powered by four AA batteries or an optional EF-BP1
battery pack, it supports manual and TTL fl ash control and auto power zoom in
the range 24–105 mm (35 mm format equivalent) and features Fujifi lm optical
wireless fl ash control, allowing it to be used as a master or remote fl ash unit for
remote wireless fl ash photography. The fl ash head can be rotated 90° up, 10°
down, 135° left, or 180° right for bounce lighting.
EF-42: This clip-on fl ash unit (powered by four AA batteries) has a Guide Number
of 42/137 (ISO 100, m/ft.) and supports manual and TTL fl ash control and auto
power zoom in the range 24–105 mm (35 mm format equivalent). The fl ash head
can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF-X20: This clip-on fl ash unit has a Guide Number of 20/65 (ISO 100, m/ft.). Pow-
ered by two AAA batteries, this light, compact unit features a dial for adjusting TTL
fl ash compensation or manual fl ash output.
EF-20: This clip-on fl ash unit (powered by two AA batteries) has a Guide Number
of 20/65 (ISO 100, m/ft.) and supports TTL fl ash control (manual fl ash control is
not supported). The fl ash head can be rotated upwards 90° for bounce lighting.
Remote releases Remote releases
RR-100: Use to reduce camera shake or keep the shutter open during a time ex-
posure.
Stereo microphones Stereo microphones
MIC-ST1: An external microphone for movie recording.
Body caps Body caps
BCP-002: Cover the camera lens mount when no lens is attached.
instax SHARE printers instax SHARE printers
SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax fi lm.
Accessories from Fujifi lm
233
12