Linear Tube Audio Z10e User Manual page 3

Home Theater Mode: Home Theater mode locks a selected input to a 9ixed volume
level. Once set the volume control is locked for that input. The expectation is the
user will connect their home theater receiver to adjust the volume level and to
expect a 9ixed volume level from the Z10e. Enter the Menu mode as above, scroll
down using the up and down arrow keys to the Home Theater selection. Use the
remote control center button to select Home Theater mode. Then select the input
desired to have a 9ixed volume. This setting is saved and the selected input will
henceforth be locked at that volume level until the Home Theater mode is removed
from that input.
Display Timeout: The Display and the Input LEDs can be set to turn off after 10
seconds, and then will come back on if a button on the remote control is pressed or
the volume knob or front panel switch is changed. There are 3 settings:
Display Only - where the Display times out, but not the Input LEDs
Both - where both the Display and Input LEDs timeout, or
None - where the Display and Input LEDs are always on
Reset to Default: The ampli9ier controls are set to Balance = 0, Display Timeout =
Off, Home Theater Mode = None, and Display Brightness = 8, and Remote Left-Right
Arrow buttons set to Not Active.
Remote Left-Right Arrow Buttons: There are two functions that can be selected
for the Left-Right Arrow buttons as follows:
Off – the remote Left-Right arrow buttons are deactivated. Prevents
accidental selection
Balance – the remote Left-Right arrow buttons will control the balance
Remote Pairing: The unit uses the Apple TV remote commercially available through
Apple and their distribution. The remote sent with the unit will already be paired to
the unit and this function does not need to be performed. In the event that the user
wants to use a different Apple TV remote, it can be paired by holding down the
remote control Play button for approximately 30 seconds until a message appears
on the display indication the remote is now paired to the ampli9ier.
Z10e Electrostatic Ampli9ier User Guide
3
Linear Tube Audio