Sony BRAVIA 3-298-969-61(1) Operating Instructions Manual page 28

Features
Quick Start
Power Saving
Film Mode
Video/Photo
Timer Settings
28
GB
The TV turns on faster than usual within two hours after switching to standby
mode. However, power consumption in standby mode is higher than usual.
Reduces power consumption of the TV by adjusting the backlight.
When you select "Picture Off", the picture is switched off, and the
indicator on the TV front panel lights up in green. The sound remains unchanged.
Provides improved picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
Auto
Provides smoother picture movement than the original film-
based content. Use this setting for standard use.
Off Turns off the "Film Mode".
~
• If the image contains irregular signals or too much noise, "Film Mode" is
automatically turned off even if "Auto" is selected.
Sets the image quality setting most suited to the input source (video or photograph
data).
Video-A Sets suitable image quality, depending on the input source,
video data or photograph data when directly connecting Sony
HDMI output-capable equipment that supports "Video-A"
mode.
Video
Produces suitable image quality for moving pictures.
Photo
Produces suitable image quality for still images.
~
• If the connected equipment does not support Video-A mode, the setting is
automatically set to "Video", even if you select "Video-A".
• "Video/Photo" is available only for HDMI or component input source (1080p and
1080i).
Sleep Timer Sets the TV to automatically switch to standby mode after a
certain amount of time.
When "Sleep Timer" is activated, the
the TV front panel lights up in orange.
z
• When you turn off the TV and turn it on again, "Sleep
Timer" is reset to "Off".
• A notification message appears on the screen one minute
before the TV switches to standby mode.
On Timer On Timer
Settings
Timer Mode
Time
Duration
Clock Set Allows you to adjust the clock manually. When the TV is
receiving digital channels, you cannot adjust the clock
manually, because the clock automatically receives the time
code from the broadcast signal.
(Timer) indicator on
Sets the TV to automatically turn on from
standby mode.
Sets the day(s) of the week you want the
timer to turn on the TV.
Sets the time you want the timer to turn
on the TV.
Sets how long you want the TV to stay on
before switching to standby mode again.
(Picture Off)