Analogue Set-Up - Sony BRAVIA 3-298-969-61(1) Operating Instructions Manual

Product Information
All Reset

Analogue Set-up

Auto Tuning
Programme Sorting
Control for HDMI Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for
HDMI. When set to "On", the following menu items can be
performed. However, power consumption in standby mode is
higher than usual.
If the specific Sony equipment that is compatible with control
for HDMI is connected, this setting is applied to the
connected equipment automatically when the "Control for
HDMI" is set to "On" using the TV.
Auto Devices Off When this is set to "On", the connected equipment that is
compatible with control for HDMI turns off when you switch
the TV to standby mode using the remote.
Auto TV On When this is set to "On", the TV turns on when you turn on
the connected equipment that is compatible with control for
HDMI.
Device List Creates or updates the "HDMI Device List". Up to 11
Update compatible equipment items can be connected, and up to 5
equipment items can be connected to a single socket. Be sure
to update the "HDMI Device List" when you change the
connections or settings. If the specific Sony equipment that is
compatible with control for HDMI is connected, "Control for
HDMI" is applied to the connected equipment automatically
when the "Device List Update" is executed on the TV.
HDMI Device List Displays a list of connected equipment that is compatible
with control for HDMI.
~
• You cannot use "Control for HDMI" if the TV operations are linked to the
operations of an audio system that is compatible with control for HDMI.
Displays product information of the TV.
Resets all settings to factory settings and displays the initial set-up screen.
~
• Do not turn off the TV or press any buttons during "All Reset" (takes about 30
seconds).
• Settings for the Digital Favourites lists, country/area, language, and auto tuned
channels will also be reset to factory settings.
Tunes in all the available analogue channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Changes the order of analogue channels stored in the TV.
1
Press F/f to select the channel you want to move to a new position, then press
.
2
Press F/f to select the new position for the channel, then press .
31
(Continued)
GB