Signal Fl Ow And Processing - Lab.gruppen PLM+ Series Quick Start Manual

12. Signal fl ow and processing
12. Signal fl ow and processing
The table below depicts the audio signal fl ow for a PLM+ device.
Module Data stored in Module FIles (Speaker Presets)
Frame Data stored in System Files and Frame Presets
INPUTS
Dante Receivers 1-8
AES 1-4
Analog 1-4
AES/Analog
pass through
to Dante
OUTPUTS
Dante 1-8
(no mutes)
The input section (inputs, input router and input mixer) allows for mixing capabilities as well as redundant and
1
prioritized inputs with automatic switch-over in case of signal failure.
Up to four Lake Processing modules provide user EQ and loudspeaker processing, including LimiterMax
2
limiting.
The Output router allows free routing between module outputs and power output channels.
3
Each power output channel provides individual channel processing, including ISVPL limiter, RPM and load
4
monitoring.
Power Amplifi er
5
26
PLM+ SERIES Quick Start Guide rev 3.0.2
Input Lake Contour
Mixer A Module A
Input
Input Lake Contour
Routers
Mixer B Module B
1-4
WITH
Input Lake Contour
INPUT
Mixer C Module C*
MUTES
Input Lake Contour
Mixer D Module D*
1 2 3
Attenuator
ISVPL
Mute
Amp Gain
Phase Rev Auto RPM
Custom RPM
Attenuator
ISVPL
Mute
Amp Gain
Phase Rev Auto RPM
Custom RPM
Attenuator
ISVPL
Mute
Amp Gain
Phase Rev Auto RPM
Custom RPM
Attenuator
ISVPL
Mute
Amp Gain
Phase Rev
Auto RPM
Custom RPM
4
LoadSmart LoadPilot AMP
LoadSmart LoadPilot AMP
LoadSmart LoadPilot AMP
LoadSmart LoadPilot AMP
5