Digital Set-Up - Sony BRAVIA 3-298-243-13(1) Operating Instructions Manual

Digital Set-up

Digital Tuning
Subtitle Set-up
Audio Set-up
30
GB
Digital Auto Tuning
Tunes in the available digital channels.
This option allows you to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters. For details, see "Auto-tunning
the TV" (page 7).
Programme Sorting
Removes any unwanted digital channels stored on the TV, and changes the order
of the digital channels stored on the TV.
1 Press
F f
/ to select the channel you want to remove or move to a new
position.
Press the number buttons to enter the known three-digit programme number of the
broadcast you want.
2 Remove or change the order of the digital channels as follows:
To remove the digital channel
Press . After a confirmation message appears, press
.
To change the order of the digital channels
g F
Press , then press /
3 Press
RETURN.
Digital Manual Tuning
Tunes the digital channels manually. This feature is available when "Digital Auto
Tuning" is set to "Antenna".
1 Press the number button to select the channel number you want to manually
F f
tune, then press /
2 When the available channels are found, press
want to store, then press
3 Press
F f
/ to select the programme number where you want to store the new
channel, then press
Repeat the above procedure to manually tune other channels.
"Subtitle Setting": When "For Hard Of Hearing" is selected, some visual aids
may also be displayed with the subtitles (if TV channels broadcast such
information).
"Subtitle Language": Selects which language subtitles are displayed in.
"Audio Type": Switches to broadcast for the hearing impaired when "For Hard
Of Hearing" is selected.
"Audio Language": Selects the language used for a programme. Some digital
channels may broadcast several audio languages for a programme.
"Audio Description": Provides audio description (narration) of visual
information if TV channels broadcast such information.
*
"Mixing Level" : Adjusts the TV main audio and Audio Description output
levels.
"Dynamic Range": Compensates for differences in the audio level between
different channels. Note that this function may have no effect for some channels.
"Optical Out": Selects the audio signal that is output from the DIGITAL AUDIO
OUT (OPTICAL) terminal on the rear of the TV. Set to "Auto" when equipment
compatible with Dolby Digital is connected, and set to "PCM" when non-
compatible equipment is connected.
z
*
This option is only available when "Audio Description" is set to "On".
f
to select the new position for the channel and press
to tune the channel.
.
.
G
to select "Yes", then press
F f
/ to select the channel you
G
.