Set-Up - Sony BRAVIA 3-298-243-13(1) Operating Instructions Manual

Set-up

Auto Start-up
Language
Screen Settings
PC Settings
26
GB
On Timer Settings
"On Timer": Sets the timer to turn on the TV from standby mode.
"Timer Mode": Selects the desired period.
"Time": Sets the time to turn on the TV.
"Duration": Selects the time period after which the TV automatically switches
to standby mode again.
Clock Set
Allows you to adjust the clock manually. When the TV is receiving digital
channels, the clock cannot be adjusted manually since it is set to the time code of
the broadcasted signal.
Starts the "first time operation menu" to select the language, country/region and
location, and tune in all available digital and analogue channels. Usually, you do
not need to do this operation because the language and country/region will have
been selected and channels already tuned when the TV was first installed
(page 6). However, this option allows you to repeat the process (e.g., to retune
the TV after moving house, or to search for new channels that have been
launched by broadcasters).
Selects the language in which the menus are displayed.
"Screen Format": For details about the screen format, see "To change the
screen format manually to suit the broadcast" on page 14.
"Auto Format": Automatically changes the screen format according to the
broadcast signal. To keep your setting, select "Off".
"Display Area": Adjusts the picture display area in 1080i/p and 720p sources
when "Screen Format" is set to "Wide".
• "Auto": During digital broadcasts, displays pictures in accordance with the
settings recommended by the broadcast station.
• "Full Pixel": Displays pictures in their original size.
• "Normal": Displays pictures in their recommended size.
"Horizontal Shift": Adjusts the horizontal position of the picture.
"Vertical Shift": Adjusts the vertical position of the picture when "Screen
Format" is set to "Smart", "Zoom" or "14:9".
"Vertical Size": Adjusts the vertical size of the picture when "Screen Format" is
set to "Smart".
"Screen Format": Selects a screen format for displaying input from your PC.
• "Full 1": Enlarges the picture to fill the vertical display area, keeping its
original horizontal-to-vertical aspect ratio.
• "Full 2": Enlarges the picture to fill the display area.
"Reset": Resets the PC screen settings to the factory settings.
"Auto Adjustment": Automatically adjusts the display position, phase and pitch
of the picture when the TV receives an input signal from the connected PC.
z
"Auto Adjustment" may not work well with certain input signals. In such cases,
manually adjust "Phase", "Pitch" and "Horizontal Shift".
"Phase": Adjusts the phase when the screen flickers.
"Pitch": Adjusts the pitch when the picture has unwanted vertical stripes.
"Horizontal Shift": Adjusts the horizontal position of the picture.
"Power Management": Switches the TV to standby mode if no signal is
received for 30 seconds in the PC input.