Table of Contents
Advertisement
1. Mute : silent mode or sound mode.
2. Info : hardware and software version.
INFO
3. Reset : sensors resetting.
4. Auto : activate or deactivate the automatic mode. The object can be moved from the DETECT ZONE to the
AUTO
DEMAG ZONE without having to press the key
When this symbol is visible, the device is in automatic mode.
To activate/deactivate the
When this symbol is visible, the device emits sound signals.
When this symbol does not appear on the display, the
To activate/deactivate the
When this symbol is visible, the device is connected to the 115 - 230 V mains supply.
When this symbol is visible, the device runs on the battery. The number of green bars indicates the battery
charge level.
Compass mode.
see paragraph 10C
1. Display of the compass mode.
2. North compass calibration.
Return to the main menu.
Press this key at any time to return to the main menu.
Settings.
see paragraph 10D
Sleep mode screen :
1. When the device is connected to the mains supply (115 - 230 V), the screen goes to sleep mode after 2 minutes without
use. To reactivate its operation, press the ON/OFF button located at the rear panel of the device.
2. When the device is running on the battery, the screen goes to sleep mode after 2 minutes without use. To reactivate its
operation, press the ON/OFF button located at the rear panel of the device.
6.
PARAMETERS
see paragraph 10D2
see paragraph 10D3
see paragraph 10D4
DEMAG
7.
SCREEN INFORMATION
AUTO
function,
see paragraph 10D5
function,
see paragraph 10D2
Display in sleep mode.
Touch the screen to return to the main menu.
6
.
see paragraph 10D5
function is activated, and the device is silent.
Advertisement
Table of Contents
