Table of Contents
Advertisement
C. Compass mode
The compass mode allows the following checks :
- The north of the device corresponds to the actual magnetic north
- Check the accuracy of watches equipped with a compass.
Compass calibration is rarely necessary unless there is too much gap between the device and the actual magnetic north.
Follow the instructions below to calibrate the compass.
C1. Press the
key to display the compass.
The following screen displays :
<->
COMPASS
+20.1 °C
L'écran suivant s'affiche :
<->
COMPASS
SAVE
360°
The following screen displays :
<->
COMPASS
+20.1 °C
Press the
key to return to the main menu
COMPASS
Display of the submenu
magnetic north). It is also possible to check the accuracy of watches equip-
ped with a compass in relation to the red dot).
This sub-menu also displays the ambient temperature in ° C.
Press the
key again to calibrate the compass.
Display of the sub-submenu
Rotate the device once or twice (360°) to display as many red dots as
possible.
Wait until the red dots stabilize and press the
new calibration.
COMPASS
Display of the submenu
MAGTEST
.
12
(the red dot indicates the actual
COMPASS
SAVE
button to save the
with the new calibration saved
Advertisement
Table of Contents
