TABLE OF CONTENTS 1. The magnetic field 2. Description 3. How to interpret the magnetic field with this device 4. Operation 5. Connections 5.1 AC adapter 5.2 Switching on the device 5.3 Switching off the device 5.4 Battery 6. Settings 6.1 Mute 6.2 Info 6.3 Reset...
THE MAGNETIC FIELD A magnetic field is manifested by a force affecting certain materials in its environment, acting on moving electrical charges. The magnitude of this force decreases as a function of the distance between the magnetic field emitter and its action point. Magnetization is a vector quantity which characterizes on a macroscopic scale the magnetic behaviour of a material sample.
PARAMETERS 1. Mute : silent mode or sound mode. see paragraph 10D2 2. Info : hardware and software version. see paragraph 10D3 INFO 3. Reset : sensors resetting. see paragraph 10D4 4. Auto : activate or deactivate the automatic mode. The object can be moved from the DETECT ZONE to the AUTO DEMAG DEMAG ZONE without having to press the key...
SETTINGS <-> <-> MAGTEST SETTINGS AUTO DETECT DEMAG INFO <-> <-> COMPASS INFO Hardware Version : V1.3 Software Version : V1.2 +20.1 °C <-> <-> COMPASS RESET SAVE SAVE 360° <-> RESET SAVE...
SWITCHING ON THE DEVICE Press the ON/OFF button located at the rear panel of the device to turn it on. The following screen displays : <-> MAGTEST DETECT MAGTEST Display of the main menu DEMAG A. Magnetism detection MAGTEST DETECT 1.
Page 10
Place the object to be tested on the DETECT ZONE surface. - If the screen remains neutral (as in the image above), it means that the object placed on the detection surface is not magnetized - If red dots appear on the screen and a positive value in μT (as shown in the image below), it means that the object placed on the detection surface is magnetized.
B. Demagnetization (without going through the DETECT function) MAGTEST DEMAG B1. Press the key on the main menu to demagnetize the object. The following screen displays : <-> DEMAG DEMAG Display of the submenu DETECT DEMAG B2. Place the object to be demagnetized on the demagnetizing surface DEMAG ZONE and press the DEMAG key.
C. Compass mode The compass mode allows the following checks : - The north of the device corresponds to the actual magnetic north - Check the accuracy of watches equipped with a compass. Compass calibration is rarely necessary unless there is too much gap between the device and the actual magnetic north. Follow the instructions below to calibrate the compass.
D. Settings D1. Press the to set the device. The following screen displays : <-> SETTINGS AUTO INFO SETTINGS Display of the submenu mode Pressing the key, the symbol will disappear (silent mode) or appear (sound mode). MAGTEST Press the key to return to the main menu INFO mode...
Page 14
mode Press the key to check the hardware and software version of the device. The following screen displays : <-> RESET RESET Display of the submenu before resetting SAVE SAVE Press the key to perform the reset. The following screen displays : <->...
Page 15
AUTO mode AUTO Press the key to activate or deactivate this function. The following screen displays : <-> SETTINGS AUTO AUTO Display of the submenu INFO AUTO Press the key to deactivate the automatic mode. The symbol disappears. AUTO Press again the key to reactivate the automatic mode.