Background Color; Ringer Melody; Button Beep - Binatone AQUAREL XDC1520 Instruction Manual

Note: If you touch no buttons for more than 30 seconds, the power-saving
mode is activated. Under that mode the LCD display will indicate the
current time without backlighting. To come back to the standby mode,
press one of the "soft" buttons [3] or [4].
You may choose one of the three LCD screen colors.
1. With the telephone in the standby mode, press the MENU button [3].
2. By pressing the button [5], select the DISPLAY menu item, then press OK [3].
3. By pressing the button [5], select the COLOR menu item, then press OK [3].
4. By pressing the or
5. Press OK [3] to confirm.
You may choose one of 20 melodies for internal and external calls.
1. With the telephone in the standby mode, press the MENU button [3].
2. By pressing the button [5], select the SOUNDS menu item, then press OK [3].
3. By pressing the button [5], select the HANDSET'S MELODY menu item, after
that press OK [3].
4. By pressing the or
5. Press the button [5].
6. By pressing the or
7. Press the button [5].
8. By pressing the or
9. Press OK [3] to confirm.
1. With the telephone in the standby mode, press the MENU button [3].
2. By pressing the button [5], select the SOUNDS menu item, then press OK [3].
3. By pressing the button [5], select the BUTTON SOUNDS menu item, then
press OK [3].
4. By pressing the or
5. Press OK [3] to confirm.

Background color

button [5], select the color you prefer.

Ringer melody

button [5], select the required volume level.
button [5], select the external call's melody.
button [5], select the internal call's melody.

Button beep

button [5], select the ON or OFF menu items.