Sony 4-116-578-11(1) Operating Instructions Manual page 45

AV2 Input Sets a signal to be input through the socket labelled
Auto
RGB
S Video
Composite
AV2 Output Sets a signal to be output through the socket labelled
VCR/ DVD recorder or other recording equipment to the
equipment connected to other sockets of the TV.
TV
Auto
Speaker Turns on/off the TV's internal speakers.
TV Speaker
Audio System
Audio Out Variable
Fixed
z
• "Audio Out" is not available for audio system connected to the TV using the
HDMI sockets.
/ AV2 on the rear of the TV.
Switches automatically among the signals
of RGB input, S video input, Composite
video input depending on the input
signal.
Inputs the RGB signal.
Inputs the S Video signal.
Inputs the Composite video signal.
/ AV2 on the rear of the TV. If you connect a
/ / AV2 socket, you can then record from the
Outputs a broadcast.
Outputs whatever is being viewed on the
screen (except signals from the HDMI IN
1, HDMI IN 2, HDMI IN 3,
COMPONENT IN and
sockets).
The TV speakers are turned on in order to
listen to the TV's sound through the TV
speakers.
The TV speakers are turned off in order
to listen to the TV's sound only through
your external audio equipment connected
to the audio output sockets. When
connected with "Control for HDMI"
compatible equipment, you can turn the
connected equipment on interlocked with
the TV. This setting must be made after
connecting the equipment.
The audio output from your audio system
can be controlled by the TV's remote.
The audio output of the TV is fixed. Use
your audio receiver's volume control to
adjust the volume (and other audio
settings) through your audio system.
/
/
/
/ PC IN
45
(Continued)
GB