Shot Mark List Operations - Sony DVW-2000P Operation Manual

6-3 Shot Mark Operations
To write in crash recording or assemble
editing
1
Hold the MARK button down for at least 2
seconds.
2
At the position you wish to write the mark, hold
down the ENTRY button, and press the MARK
button.
A mark of the type selected in item G04 of the shot
mark operation menu is written.
Z
MARK button
REC/ERASE indicator
Writing during playback, while stopped, or
during a search
When this unit is in any of the playback, stop, or
search modes, you can write a post mark only.
1
Hold the MARK button down for at least 2
seconds.
The REC/ERASE indicator lights.
2
At the position you wish to write the mark, hold
down the ENTRY button and press the MARK
button.
A post mark is written the instant you pressed the
MARK button.
While the mark is being written, the message
"RECORD SHOT MARK" appears on the
monitor, and the REC/ERASE indicator flashes.
6-4
Chapter 6 Shot Mark Function
ENTRY button
Erasing a shot mark
Select the shot mark from the shot mark list, and then
carry out the deletion operation.
For details of the procedure, see page 6-6.

6-3-3 Shot Mark List Operations

Displaying the shot mark list
Hold down the ENTRY button and press the LIST
button.
Z
LIST button
All of the shot mark types for which item G02 in the
shot mark operation menu is set to "ON" appear in the
list. If you do the same operation again, the list display
disappears.
While the shot mark list is displayed, the function
menu display changes as follows.
SHT
MRK MEMO SELECT DELETE
ENTRY button
SETING EXIT