Displaying And Modifying Attribute Data - Sony DVW-2000P Operation Manual

7-3-5 Displaying and Modifying Attribute Data

You can display and modify attribute data. The
example below shows attribute data displayed on the
monitor.
Video final recording date
Number of cue points
Amount of memory used
Video final recording date
The most recent date (year/month/day) on which video
was recorded on the tape.
Title
The title (name assigned to Tele-File, etc., maximum
24 characters).
The title can be modified.
ID
The ID (unique number assigned to Tele-File,
maximum 24 characters).
The ID can be modified.
Administrator data
Data about the administrator of the cassette or tape
material (maximum 16 characters).
The administrator data can be modified.
Model name
The model name of the VTR that recorded most
recently to the tape.
Serial number
The serial number of the VTR that recorded most
recently to the tape.
Title
ID
Administrator data
Model name
Serial number
Write inhibit setting
Thread count
Control mode
Memory size
TELE-FILE
*REC DATE
TITLE
ID
ADMIN
MODEL
SERIAL
WRITE INHIBIT OFF
THREAD COUNT 00012
CUE POINT No. 0003
CONTROL MODE
SIZE 01024 USED 0270
Write inhibit setting
Whether the entire Tele-File is write inhibited.
The write inhibit setting can be modified.
Thread count
The thread count value recorded on the tape.
Number of cue points
The number of cue points recorded in the Tele-File.
You can check the cue point values in clip data display
mode.
Control mode
The setting of setup menu item 133.
For more information about setup menu item 133, see page
12-11.
Memory size
The size of the memory in the Tele-File (unit: bytes).
Amount of memory used
The amount of memory currently being used (unit:
bytes).
INFORMATION
2001/07/21
TEST 01
00000
panel
7-11
Chapter 7 Tele-File