Sony DVW-2000P Operation Manual page 128

12-4 Items in the Extended Setup Menu
Menu items in the range 300 to 399, relating to editing operations (Continued)
Item number Item name
316 CONFIDENCE PB MODE
317 AUDIO EDIT MODE
318 EDIT RETRY
319 PREREAD SELECT
320 DIGITAL AUDIO PB
PROCESS ON EDIT
POINT
326 AUTOMATIC IN ENTRY
AFTER AUTO EDIT
334 EE REFERENCE
CONTROL
336 EDIT PRESET INHIBIT IN
KEY PANEL CONTROL
12-14
Chapter 12 Setup Menus
Settings
Sets F3 (CONFI) in function menu HOME page to ENABLE.
For settings of F3 (CONFI), see page 11-3.
mode1: The CONFI playback function is only enabled during recording.
mode2 : The CONFI playback function is also enabled during normal playback
with the edit preset function being on, as well as during recording.
mode3: The CONFI playback function is only enabled during crash recording.
Note
Playback is performed in advance mode during auto edit previewing regardless of
the setting of this menu item.
Select the type of audio transition used for digital audio editing.
CUT: Cut editing (audio discontinuity at transition point, and possible noise during
playback).
CROSS : Cross-fade
FI/FO: Fade in and out
t: Time set by item 803 DIGITAL AUDIO FADE TIME
For two-VTR editing, set when this unit is used as the recorder. Selects the
operation if the recorder was not synchronized in time.
OFF: Editing is not carried out, and the unit stops.
ON : The editing is automatically retried (up to twice).
Specify the preread operation.
A/V : Preread for both audio and video.
AUDIO: Preread for audio only.
VIDEO: Preread for video only.
The preread operation is enabled when the function menu item PREREAD is set
to ON or with a command from the 9-pin remote control interface.
Select the treatment of audio playback at edit points.
CUT : Carry out a cut (possibly resulting in audio discontinuities at the edit point).
FADE: Fade out and fade in.
Select whether or not to automatically set the OUT point of the previous edit as
the next IN point at the end of an automatic edit.
OFF : No automatic setting
R: Set recorder IN point automatically.
R & P: Set recorder IN point automatically, and also player IN point in two-VTR
editing.
Specify how to select the reference video signal in E-E mode.
normal : Select according to the flowchart in Section 3-2-1 "External Sync Signal
for the Internal Reference Video Signal Generator" (page 3-3) .
input : In E-E mode select the input video signal. When not in E-E mode, select
according to the flowchart in Section 3-2-1 "External Sync Signal for the
Internal Reference Video Signal Generator" (page 3-3) .
Specify which buttons are disabled in the editing mode setting section on the
lower control panel.
off : Disable all buttons.
TC: Disable the TC button.
IN/OUT
t
IN/OUT
t