Shot Mark List Operations - Sony MSW-M2100 Operation Manual

5-3 Shot Mark Operations
Erasing a shot mark
Select the shot mark from the shot mark list, and then
carry out the deletion operation.
For details of the procedure, see page 5-5.

5-3-3 Shot Mark List Operations

Displaying the shot mark list
Hold down the ENTRY button and press the LIST
button.
Z
LIST button
All of the shot mark types for which item G02 in the
shot mark operation menu is set to "ON" appear in the
list. If you do the same operation again, the list display
disappears.
While the shot mark list is displayed, the function
menu display changes as follows.
SHT
MRK MEMO SELECT DELETE
5-4
Chapter 5 Shot Mark Function
ENTRY button
SETING EXIT
Example of list display
The following figure shows how the list is organized.
Shot mark number of current cursor
position / total number of stored shot
marks
Separator
between read-in
groups of shot
marks
Cursor (current
shot mark position)
Position in list
Shot mark type
R: recording start mark
S1: shot mark 1
S2: shot mark 2
V: virtual shot mark
P: post mark
#: memo mark
Selecting a shot mark
Turn the MULTI CONTROL knob to align the asterisk
cursor with the desired shot mark.
Entering virtual shot marks
When the REC/ERASE indicator is off, hold down the
ENTRY button and press the MARK button.
Z
MARK button
Time code
ENTRY button