Sony HANDYCAM HDR-FX1000E Operating Manual page 80

Press the MENU button t select the
ON ( )
The time shortens slightly until recording
restarts from the state that the drum has
stopped rotating, but the transition from
the last recorded scene may not be smooth.
Select this when you do not want to miss a
recording chance.
z Tips
• When this function is set to [ON], the interval
between scenes freezes for a moment (editing on
your computer is recommended).
• When the camcorder is left in standby for more
than about 3 minutes, your camcorder exits from
standby (the drum stops rotating) to prevent tape
wear and battery loss. Since the power does not
turn off, you can restart recording by pressing
the REC START/STOP button again.
BEEP
B ON
Activates a melody when you start/stop
recording.
OFF
Cancels the melody.
REC LAMP (Recording lamp)
When you set this function to [OFF], you
can turn off the camera recording lamps
during recording. The default setting is
[ON].
REMOTE CTRL (Remote control)
When you set this function to [ON], you
can use the supplied Remote Commander
(p. 122). The default setting is [ON].
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
80
(OTHERS) with the SEL/PUSH EXEC dial.