Step 6: Setting The Date And Time - Sony HANDYCAM HDR-FX1000E Operating Manual

Step 6: Setting the date and time

Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, [CLOCK SET] screen
appears every time you turn on your
camcorder or change the POWER switch
positions.
z Tips
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 112).
SEL/PUSH EXEC dial MENU button
Skip to step 4 when you set the clock for
the first time.
1
Press the MENU button.
PROG. SCAN
IRIS/EXPOSURE
GAIN SETUP
AGC LIMIT
MINUS AGC
WB PRESET
AWB SENS
2
Select (OTHERS) by turning
the SEL/PUSH EXEC dial, then
press the dial.
OTHERS
RETURN
CAMERA PROF.
ASSIGN BTN
PHOTO/EXP.FOCUS
CLOCK SET
WORLD TIME
LANGUAGE
QUICK REC
[ MENU ] : END
3
Select [CLOCK SET] by turning
the SEL/PUSH EXEC dial, then
press the dial.
CLOCK SET
Y M
2008 - 1 -
[ MENU ] : CANCEL
4
Set [Y] (year) by turning the SEL/
PUSH EXEC dial, then press the
dial.
You can set any year up to the year
2079.
CLOCK SET
Y M
1
2008 - -
[ MENU ] : CANCEL
5
Set [M] (month), [D] (day), hour
and minute, then press the dial.
The clock starts.
- - : - - : - -
-:--:--
D
1 0 : 00
-:--:--
D
1 0 : 00
Continued ,
21