Step 3: Charging The Battery Pack - Sony HANDYCAM HDR-FX1000E Operating Manual

Step 3: Charging the battery pack

You can charge the "InfoLITHIUM"
battery pack (L series) with the
supplied AC Adaptor.
b Notes
• You cannot use batteries other than the
"InfoLITHIUM" battery pack (L series)
(p. 107).
DC plug
AC Adaptor
Power cord (mains lead)
1
Press the battery pack against the
back of your camcorder and slide
it down.
DC IN jack
To the wall outlet
(wall socket)
2
With the B mark on the DC plug
facing outwards, connect the DC
plug to the DC IN jack on your
camcorder.
3
Connect the power cord (mains
lead) to the AC Adaptor.
4
Connect the power cord (mains
lead) to the wall outlet (wall
socket).
5
Set the POWER switch to
OFF (CHG).
The CHG lamp lights up and charging
starts.
B mark
Continued ,
15