Recording From Connected Equipment With A Timer (Synchro Rec) - Sony RDR-VX500 Operating Instructions (RDRVX500) Operating Instructions Manual

5
Press ENTER.
The date, start and stop times, channel, and
recording mode appear.
The c indicator lights up in the front panel
display, and the recorder is ready to start
recording. If the c indicator flashes in the
front panel display, check that a recordable
disc is inserted.
Timer – Standard
No Rec To Date Start
No.1
01 DVD 06/14 09:00PM
02 DVD 06/14 09:15PM
RecTo Date Start
03 --- --/-- --:--
:
DVD 11/15 9 00
PM
04 --- --/-- --:--
VCR Plus+
05 --- --/-- --:--
06 --- --/-- --:--
6
Select "RecTo" using </, and select
"DVD" using M/m, and press ENTER.
If you want to change other settings, press </
, to select the item and press M/m to change
the setting.
7
Press SYSTEM MENU to exit the menu.
To stop recording
Press x STOP twice.
Note that it may take a few seconds for the
recorder to stop recording.
If the timer settings overlap
See page 51.
To confirm, change, or cancel timer recording
See "Checking/Changing/Canceling DVD Timer
Settings (Timer List)" on page 55.
z Hint
You can also display the Timer programming menu as
follows:
1 Press SYSTEM MENU.
The System Menu appears.
2 Select "Timer," and press ENTER.
3 Select "Timer – VCR Plus+," and press ENTER.
Notes
• When the PlusCode number is incorrect, "Invalid
code" appears on the TV screen.
• Before the timer recording starts, "TIMER REC"
flashes in the front panel display.
• Even if a timer recording is started in the condition with
the recorder power on, the recorder power is automatically
turned off when the timer recording finishes.
• If you attempt to make a timer recording of a copy
protected broadcast, a black screen is recorded.
10:10 AM
End Source Mode Edit
10:00PM CH8 LP
09:45PM CH1 LP
Stop CH Mode
--:-- ---- ---
:
11 00 CH 83 LP
PM
--:-- ---- ---
--:-- ---- ---
--:-- ---- ---
Recording from Connected
Equipment with a Timer
(Synchro Rec)
+
RW - RW - RW
VR
Video
You can set the recorder to automatically record
programs from connected equipment that has a
timer function (such as a satellite tuner). Connect
the equipment to the LINE 1 IN jacks of the
recorder (page 35).
When the connected equipment turns on, the
recorder starts recording a program from the LINE
1 IN jacks.
DVD
SYSTEM
MENU
REC MODE
1
Press DVD to control the DVD recorder.
2
Insert a recordable disc.
3
Select the line input audio.
Set "Line Audio Input" of "Audio" to
"Stereo" or "Main/Sub" in the "Setup"
display (page 103).
+ -
R R
M/m,
ENTER
x STOP
SYNCHRO
REC
, continued
53