Recording From Connected Equipment With A Timer (Synchro Rec) - Sony RDR-VX511 Operating Instructions Manual

adjusts the recording mode. Select "AUTO" for
"Mode" when setting the timer.
z Hints
• You can play the recorded program by selecting the
program title in the Title List menu.
• When the start time and the channel or input source to
be recorded are the same but the "RecTo" setting
differs, the program is recorded to both the DVD disc
and the VHS tape.
• You can also turn on the timer programming menu
from the System Menu. Press SYSTEM MENU to
select "Timer," and select "Timer-Standard."
Notes
• To record a cable or satellite program, turn on the cable
box or satellite receiver and select the program you
want to record. Leave the cable box or satellite receiver
turned on until the recorder finishes recording.
• Even when correctly set, the program may not be
recorded if another recording is underway, or other
prioritized timer setting overlaps.
• Before the timer recording starts, "TIMER REC"
flashes in the front panel display.
• The recorder automatically turns off when a timer
recording finishes, even if the recording started with
the recorder turned on.
• The recorder does not record programs with Copy-
Never signals. Such recordings stop after a few
seconds.
50
Recording From Connected
Equipment With a Timer
(Synchro Rec)
+
RW - RW - RW
VR
Video
You can set the recorder to automatically record
programs from connected equipment that has a
timer function (such as a satellite tuner). Connect
the equipment to the LINE 1 IN jacks on the rear
of the recorder (page 27).
When the connected equipment turns on, the
recorder starts recording a program from the LINE
1 IN jacks.
DVD
SYSTEM
MENU
REC MODE
SYNCHRO
REC
1
Press DVD to operate the DVD recorder.
2
Insert a recordable disc.
3
Select the line input audio.
Set "Line Audio Input" of "Audio" to
"Stereo" or "Main/Sub" in the "Setup"
display (page 99).
+ -
R R
M/m/</,,
ENTER
x STOP